Fury Todo List

Its mainly little jobs now, in no particular order these are:

  • Interior
    • Fit the dashhboard
      • Mount the dash
      • Mount the T-Pull handle for the fire extinguisher
      • buy and fit a working flasher relay
      • Fit (Temporary) buttons for dip/mains and horn
      • Make and fit temporary shift lever
      • Fit the heater hose from the dash to the heater
      • Fit the heater hose from the heater to the driver footwell (Exhaust should keep the passenger warm.)
      • Fit a working switch for the heater fan
      • Fit the intercom
      • Order and fit switch for wipers
    • Stick down carpeting
    • Carpet around the windscreen aperture
  • Engine:
    • Make an airbox to get through SVA
    • Adapt existing air filter to sit 180 degrees from its current location and make hole in bonnet
    • Remove AIS system and turn it into a breather system
    • Order and fit a catch tank
    • Change the O-Ring on the sump for a yamaha part
    • Order and fit alloy tubes as current ones seem to be porous
  • Bodywork:
    • Glue rear lights in place
    • Use some PU to fill any gaps
    • Fit front air dam
    • Buy and fit some mirrors
    • Wash clean and polish
    • Buy and fit rear diffuser
    • Fit side repeaters
  • Windscreen:
    • Buy and fit windscreen
    • Fit windscreen wipers
    • Fit washer nozzle
  • Brakes:
    • Set the brake bias
    • weld up the bias bar for IVA
    • Remove the bias bar adapter
  • Wheels
    • Balance the wheels as a couple of the sticky weights came off
    • Fit all the wheel nuts, and cut down the front studs if required
  • Suspension
    • Book and appointment to get suspension set up and corner weighted

Leave a Reply

Your email address will not be published. Required fields are marked *