I finished the interior of the car this weekend. I was being held up mainly as I had to wait on some parts. I had to fit the on/on/on switch for the wipers, however in some fit of mouser madness I misread the part number and whilst it is an on-on-on switch, its actually not any use on its own, as its positions are Z+X X+A A+B which means I still need to use a relay. So I just broke, and wired up a relay that breaks the park circuit when the wipers are on. They wipe, and seem to do so pretty quickly.
I fitted the replacement flasher, which flashes, and checked all the switches function as they should. They did, so I bolted in the dash, its pretty solid, and fits just the way it should. I think it looks really good, and am very pleased with the end result. It was definitely worth all the mess. I cleaned the interior with an air gun, hoover, and fabric cleaner, and routed the internal wiring, and stuck down the side carpets. The immobilizer stopped working because the sensor was too far away from the fob, so i need to move it somewhere else, but I’m not sure where yet.
I then trimmed down the seat belt tails to a more sensible size, i went for six inches past the buckle. Next up was to trim around the windscreen. My plan here is to use alcantara, with one edge tucked under the windscreen ever so slightly (should be fine since its bonded in place with copious amounts of PU) and the other is held down with some U trim which also puts the required radious on the edge of the windscreen surround. I then used contact adhesive in the bits in the middle, so hopefully it will all stay up there. It was fiddly and took forever, but looks pretty good now.
I bolted up the hideous sierra steering wheel, and checked everything worked, it did so had a celebratory drive around the car park, gear change is crappy since there is no tactile feedback from the lever, but this will be easily remedied post IVA. The car is pretty quick, first gear is pretty tall though, i’m hoping the 3.21 diff was the right choice afterall. The interior is now finished, I’ll need to start covering it when i’m doing messy jobs to try and keep it nice and clean.